86-371-67575157
West 500M Of Rizhao Road And Gongye Road, Mazhai Industrial Park, Zhengzhou, Henan
Disk Feeding machine:
1 Evenly feeding
2 High efficiency
3 Low cost
4 Reasonable Price
Disk Feeder/Disc Feeder/Disk Feeding machine
Introduction:
Disk Feeding Machine is a cubage measuring feeding equipment; it supplies materials to the next procedure evenly and continuously; at the same time, it can bear relatively higher pressure. It is a fine powdery material feeder suitable for non-cohesive materials like coal powder, cement, chamotte, limestone, shale, gangue and clunch. It is widely used in gold concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding.
Disk Feeding Machine is suitable for conveying of materials with granularity less than 50mm, while it is not suitable for cohesive materials, easy-to-flow or hard-to-flow materials.
Features:
1. Stable and long span life.
2. Easy to adjust.
3. Reliable operation.
4. Easy maintenance.
5. No pollution.
Working Principle:
There are a gap of 50mm and a blade between the hopper and the disk. When the disc runs, the materials smaller than 50mm will go through the gap, and the blade will stop them from running with the disk and then push them to the outlet.
Parameters:
Model | Form | Disc diameter(mm) | Feeding capacity(m3/h) | Speed disk(r/min) | Material size(mm) | Motor powder(kw) |
600 | block shield | ø600 | 0.69-3.9 | 8 | 25 | Y90L-4 1.1KW |
800 | block shield | ø800 | 1.6-7 | 8 | 40 | Y90L-4 1.5KW |
1000 | block shield | ø1000 | 4.2-12 | 8 | 50 | Y100L-4 2.2KW |
1200 | block shield | ø1250 | 6-15 | 7.5 | 50 | Y112L-4 4KW |
1500 | block shield | ø1500 | 12-21 | 7.5 | 50 | Y1120L-4 4KW |
2000 | block shield | ø2000 | 18-32 | 7.5 | 50 | Y132-4L 7.5KW |
About Us:
