Bucket Elevator/Elevator/Lift Elevator

Introduction:

Bucket elevator is straight-through processing type, and applies to upward transporting incompact materials like powder, grain, and small particles, which is widely used in many industries. Bucket elevator is allowed to convey materials with high temperature when armed with special circle chain structure.

Feature:

1 Large transmission capacity. Elevate the capacity up to 15-800 cubic meters / hour.

2 Low energy consumption. This machine used for the flow feed method, Gravity induced discharging the material. And use the Intensive large capacity hopper conveyor.

3 Low chain speed, but big transmission capacity, nearly no material flow back, so small drive power, Theoretical calculation Shaft power is 25%-45% for the Cycle chain elevator.

4 Long service life. Strengthed wear-resistant chain enlarge the service life of the chain and hopper. Actual use shows that: transport chain use life more than 5 years.

5 Lifting height high. with low speed of the chain speed, stable working, and used the strengthed wear-resistant chain, so the lifting height is higher.

6 Good sealing, reduce environmental pollution.

Working Principle:

Materials from the hopper to the top with the belt conveyor or chain, and turn downward around the top rounds, then the bucket elevator receives the materials into the tank. Vertical bucket elevator with transmission usually adopts rubber band which is equipped in the drive drum top or down. Vertical bucket elevator is generally equipment with a classis to prevent the dust in it.

Main technical parameters:

About Us: